Konig Gas Heating IronDesigned for use with hardwax, this portable, gas-operated heating iron will melt the filler at the correct temperature to mould and mix. The blade tip has been designed to hold the wax in liquid form allowing precise placement of the filler. The temperature is variable and the blade takes only 30 seconds to reach temperature. For best results ignite the heater at the high temperature setting and then turn it down to its lowest setting during use. The heatproof cap has been designed to ensure the heater is switched off when replaced.
Because of legal regulations, the tool is supplied unfilled. Gas can be bought from any shop that sells good quality lighter gas. Use with the Konig Special Applicator tool, available here, to make an ideal combination for most wax repair needs.