Description
Transparent unfilled hot melt adhesive based on EVA in granules is intended for standard banding of furniture edges using edge-banding machines with slow feed rate.
Transparent hot melt adhesive Hranitherm 608.30 based on EVA is suitable for gluing edges using edge-banding machined with a slow machine feed rate. It is characterised by good wettability, high adhesive force and longer open time.
- Brookfield viscosity (200°C at 27/2 rpm) 50,000-70,000 mPas
- Softening point (ring and ball method) 92–102 °C
- Density at 20°C 1.00 g/cm3
- Suitable working conditions:
- Temperature in vessel 160–190 °C
- Temperature on roller 190–220 °C
- Material moisture content 8-12%
- Ideal feed rate 4–8 metres per minute
Application:
When using hot melt adhesive, observe and monitor the application temperature and check it on a regular basis by measuring on the roller or nozzle. The temperature shown on the edge-banding machine control panel may differ from the actual temperature. Lower temperature of the adhesive may affect its open time and consequently impair the bonded joint quality. At a higher temperature, the adhesive may degrade, which affects its colour, viscosity and adhesion. When banding edges from various materials, regular testing of banding strength and quality is advisable. Recommended temperature of the environment and materials is 15–25°C.
Clean any residual adhesive on furniture elements and the machine using an appropriate cleaner.
For additional information please refer to the material technical and safety data sheet here. This is also available to be sent by email on request.
Packaging and storage:
Keep in original container. If stored in closed containers in a cold and dry place at temperatures not exceeding 20°C, the shelf life is 24 months.
If in doubt, please don't hesitate to contact us.
Many thanks.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.