High quality sanded, untreated pre-glued Iron-on American White Oak Real Wood Veneer circa 0.5mm thick
- Ironed on, typically with a medium to high setting (depending on the iron).
- Normally despatched within one working day from receipt of cleared payment.
- Free delivery on all UK orders.
- Guidance notes included.
22mm, 30mm 40mm, 50mm, 100mm, 150mm, 200mm, 250mm and 300mm widths available in our shop listings. If you can’t see what you require, please contact us.
Please use the drop down box above to choose your required width and/or length.
Using iron on veneer can be a tricky process. We include guidance notes with all orders. To help avoid issues, we strongly suggest that these are read before using the veneer. If unsure after reading them, please don’t hesitate to contact us. If you cannot find the guidance notes, please contact us before starting and we will email a copy. If preferred, we are happy to advise before ordering, particularly if you are unsure whether the veneer will suit your application/project.
This is a natural raw wood veneer product. A finish should be applied after bonding. The veneer can also be stained to taste or to achieve a closer colour match.
Apart from our 2500mm x 300mm sheets, there will be finger joints in the length of the veneer. These are at random lengths, normally between 1m and 2m. This is normal for longer lengths of real wood veneer and edging.
If butting multiple sheets together, it should be noted that there can be shrinkage. The veneer expands and contracts as it heats, cools and natural moisture levels decrease. This can lead to a small gap between sheets. This can be filled using a grain filler, or similar product.
All real wood varies in colour naturally and every piece, roll and sheet is unique. With this in mind, the listing photos are for general guidance only. Every roll will be different. We have added several photos to give an idea of what the veneer might look like. We try and match multiple sheets as best as we can, but we cannot guarantee how close they will be in appearance. We can normally find consecutive sheets of the 2500mm x 300mm veneer.
New, unfinished wood/edging will almost certainly be lighter in colour than existing wood, especially as our material has been sanded. If matching to existing wood, it is very likely that the piece to be matched will have been treated with a finish, e.g. wax or lacquer. Dampening a corner of the veneer slightly will give an idea of what the colour and grain will look like after a finish has been applied. As we say above, the veneer can be stained to match existing shades and colours.
Aging can also change the shade/colour of existing wood. The final colour of any real wood edging is often determined by the finish(es) applied. We are happy to advise in this respect and also look at samples or photos sent in. Please contact us for details.
Samples are available to buy for a small charge just to cover P&P. However, they are really only useful for identifying species. As we say above, colour and grain varies even in the same species.
Sheet(s) should be unpacked (within 21 days) and used as soon as possible to avoid the veneer drying out and finger joints opening.
If in doubt, please contact us for advice. Many thanks.